Module HL3 :grober43 a écrit :je viens de faire le test, ca marche pas, j'ai paramétré winape avec HL3, mais quand je sélectionne un jeux j'ai un message d'erreur "Failed to load Rom: xxxxxx\npmdujeux cardrige.cpr.
Je sais pas trop quoi faire
Code : Tout sélectionner
MEmu = WinAPE
MEmuV = v2.0.a18
MURL = http://www.winape.net/
MAuthor = djvj & brolly
MVersion = 2.0
MCRC = BA48CA3E
iCRC = FC556A8E
MID = 635038268934069007
MSystem = "Amstrad GX4000","Amstrad CPC","Amstrad CPC Plus"
;----------------------------------------------------------------------------
; Notes:
; You cannot pass a game name to the emu through CLI, but the emu will autolaunch the game set in its ini file.
; Run the exe manually and goto Settings->General, check "Disable Automatic Update"
; On the Display tab, check "Hide Control Panel", "Hide Menus" and "No Right-Click Menu". "Linear Palette" will slightly darken image if you enable it.
; On the Sound tab, check "44 kHz" and "16 bit".
; On the Input tab, set your controls and hit OK.
; Press F10 to turn on fullscreen then ALT+F4 to exit and save your settings.
; Make sure your rom extension is either zip or cpr, not both.
; Make sure you have Arnold V Diagnostic Cartridge.cpr rom on WinApe\ROM folder if you want to run No Exit.
; You can use any other CPCPlus cart if you prefer, in that case make sure you edit the variable below to the correct name.
;
; Default WinAPE disk swap/flip keys:
; Shift+F1 will flip Disk on Drive A:
; Shift+F2 will flip Disk on Drive B:
; Shift+Ctrl+F3 will swap Disks on Drive A: and B:
;----------------------------------------------------------------------------
StartModule()
FadeInStart()
settingsFile := modulePath . "\" . moduleName . ".ini"
Fullscreen := IniReadCheck(settingsFile, "Settings", "Fullscreen","true",,1)
DiagCart := IniReadCheck(settingsFile, "Settings", "DiagCart","Arnold V Diagnostic Cartridge.cpr",,1)
DiagCart := GetFullName(DiagCart)
7z(romPath, romName, romExtension, 7zExtractPath)
;Clean any previous disk in drives
IniWrite, %A_Space%, %emuPath%\WinAPE.ini, Drives, Drive(0) ; Drive A Side A
IniWrite, %A_Space%, %emuPath%\WinAPE.ini, Drives, Drive(4) ; Drive A Side B
IniWrite, %A_Space%, %emuPath%\WinAPE.ini, Drives, Drive(1) ; Drive B Side A
IniWrite, %A_Space%, %emuPath%\WinAPE.ini, Drives, Drive(5) ; Drive B Side B
;Clean any previous cart
IniWrite, %A_Space%, %emuPath%\WinAPE.ini, ROMS, Cartridge
;If autobootrom=true it means rom will start through CLI otherwise another cart must be loaded before hand as a workaround
autobootrom=true
If romName contains No Exit
{ ;No Exit won't boot if the cart is already plugged it requires another cart (not all work) to be plugged and then we need to swap them
;we use the diagnostic cart as the booting cart since it always works
autobootrom=false
}
;Change settings based on system name (CPC Plus games will only work if system is CPC Plus or GX4000)
If systemName = Amstrad CPC
{ IniWrite, false, %emuPath%\WinAPE.ini, Configuration, Enable Plus
IniWrite, 0, %emuPath%\WinAPE.ini, Configuration, CRTC Type
IniWrite, false, %emuPath%\WinAPE.ini, ROMS, Cartridge Enabled
IniWrite, OS6128, %emuPath%\WinAPE.ini, ROMS, Lower
IniWrite, BASIC1-1, %emuPath%\WinAPE.ini, ROMS, Upper(0)
} Else {
IniWrite, true, %emuPath%\WinAPE.ini, Configuration, Enable Plus
IniWrite, 3, %emuPath%\WinAPE.ini, Configuration, CRTC Type
IniWrite, true, %emuPath%\WinAPE.ini, ROMS, Cartridge Enabled
IniWrite, %A_Space%, %emuPath%\WinAPE.ini, ROMS, Lower
IniWrite, %A_Space%, %emuPath%\WinAPE.ini, ROMS, Upper(0)
}
;Plug the cartridge/disk through ini file
If (systemName = "Amstrad CPC Plus" AND romExtension = "dsk")
IniWrite, cpc_plus.cpr, %emuPath%\WinAPE.ini, ROMS, Cartridge
Else
If autobootrom = true
If romExtension = .zip
IniWrite, %romPath%\%romName%%romExtension%\:%romName%.cpr, %emuPath%\WinAPE.ini, ROMS, Cartridge
Else If romExtension = .cpr
IniWrite, %romPath%\%romName%%romExtension%, %emuPath%\WinAPE.ini, ROMS, Cartridge
Else
IniWrite, %DiagCart%, %emuPath%\WinAPE.ini, ROMS, Cartridge
;Set Fullscreen
If (Fullscreen = "true" && autobootrom = "true")
IniWrite, true, %emuPath%\WinAPE.ini, Configuration, Full Screen
Else
IniWrite, false, %emuPath%\WinAPE.ini, Configuration, Full Screen
;Set Numlock since you should have your joystick configurations made for this
SetNumlockState, off
;MultiDisk loading, this will load the first 2 disks into drives A and B since some games can read from both drives and therefore
;the user won't need to change disks through the MG menu.
If (romName contains "(Disk 1" OR romName contains "(Side A")
{ ;If the user boots any disk rather than the first one, multi disk support must be done through HyperLaunch MG menu
multipartTable := CreateRomTable(multipartTable)
If multipartTable.MaxIndex()
{ ;Make the searches case insensitive
original_case_sense := A_StringCaseSense
StringCaseSense, Off
;Has multi part
for index, element in multipartTable
{ current_rom := multipartTable[A_Index,1]
driveA_sideA = (Side A,(Disk 1),(Disk 1 Side A
driveA_sideB = (Side B,(Disk 1 Side B
driveB_sideA = (Disk 2),(Disk 2 Side A
driveB_sideB = (Disk 2 Side B
If current_rom contains %driveA_sideA%
IniWrite, %current_rom%, %emuPath%\WinAPE.ini, Drives, Drive(0)
Else If current_rom contains %driveA_sideB%
IniWrite, %current_rom%, %emuPath%\WinAPE.ini, Drives, Drive(4)
Else If current_rom contains %driveB_sideA%
IniWrite, %current_rom%, %emuPath%\WinAPE.ini, Drives, Drive(1)
Else If current_rom contains %driveB_sideB%
IniWrite, %current_rom%, %emuPath%\WinAPE.ini, Drives, Drive(5)
}
;Restore original StringCaseSense
StringCaseSense, %original_case_sense%
}
}
Run(executable . " """ . romPath . "\" . romName . romExtension . """ /A", emuPath)
WinWait("ahk_class TfrmCover") ; waiting for logo to show
WinHide, ahk_class TfrmCover ; making logo dissappear!
WinWait("Windows Amstrad Plus Emulator ahk_class TfrmEmu")
WinWaitActive("Windows Amstrad Plus Emulator ahk_class TfrmEmu")
If autobootrom != true
{ ;Lets swap carts to load No Exit
Sleep 500 ;Wait just an instant for the diagnostic cart to load
Send ^{F3}
WinWait("Open ahk_class #32770")
WinWaitActive("Open ahk_class #32770")
Sleep, 100
ControlSetText, Edit1, %romPath%\%romName%%romExtension%, Open ahk_class #32770
Send {Enter}
Sleep, 100
If Fullscreen = true
Send {F10} ;Go Fullscreen
}
FadeInExit()
Process("WaitClose",executable)
7zCleanUp()
FadeOutExit()
ExitModule()
CloseProcess:
FadeOutStart()
WinClose("ahk_class TfrmEmu")
Return
